5102 l
PHRASEOLOGY (AK) AWNING MFG. AND ERECTION—METAL—ERECTION BY AN INSURED ENGAGED IN THE ERECTION OF CANVAS PRODUCTS
(AK) AWNING, TENT, OR CANVAS GOODS INSTALLATION, REMOVAL, OR REPAIR
| Note: |
Applies to operations away from the shop. Awnings included in Code 5102 are (a) canvas- or vinyl-covered or (b) metal-covered when installed by a contractor that also installs canvas- or vinyl-covered awnings. Metal-covered awnings installed by a contractor that does not also install canvas- or vinyl-covered awnings are assigned to Code 5538. |
(CA) FLOOR INSTALLATION—ELEVATED
| Note: |
This classification includes the installation of elevated access floors, including the installation of access steps, ramps, and railings in connection therewith. |
(CA) IRON, STEEL, BRASS, BRONZE OR ALUMINUM ERECTION—NON-STRUCTURAL—WITHIN BUILDINGS
| Note: |
This classification includes all the following and similar metal features of construction within buildings: railings, bank cages and similar grille work, metal wall paneling, and movable steel partitions. The erection of staircases shall be separately classified. |
(FL) DOOR AND WINDOW INSTALLATION—ALL TYPES—RESIDENTIAL AND COMMERCIAL
| Note: |
Includes the installation of all types of interior and exterior doors and windows—commercial and residential—including, but not limited to, aluminum, vinyl, wood, composite, fiberglass, and steel when performed by a specialty contractor. The installation of doors and windows in connection with the construction of residential dwellings or commercial buildings when performed by carpentry contractors engaged in other carpentry operations or employees of general contractors responsible for the entire construction project to be separately rated. Code 5102 is also assigned to the installation of shower doors and enclosures made from all materials including glass. The installation of storm shutters, such as panels, accordion, rolldown, fabric screens, and corrugated plastic and sheet metal are also assigned to Code 5102. Overhead door installation to be separately rated as Code 3724 |
(FL) IRON OR STEEL—ERECTION—STEEL FRAME—INTERIOR—LIGHT-GAUGE STEEL—BY SPECIALIST CONTRACTOR
(MA) AWNING MFG. AND ERECTION—METAL—ERECTION BY AN INSURED ENGAGED IN THE ERECTION OF CANVAS PRODUCTS
(MA) AWNING, TENT, OR CANVAS GOODS ERECTION, REMOVAL, OR REPAIR
| Note: |
Applies to operations away from the shop. |
(MA) CAMOUFLAGE WORK—DECORATING
(MA) CANVAS SIDEWALLS—ERECTION—AT BALL PARKS, ETC.
(MA) DOOR, DOOR FRAME OR SASH ERECTION—METAL OR METAL COVERED
| Note: |
Installation of storm doors or storm sash to be separately rated as Code 5645—Carpentry. Overhead door installation to be separately rated as 3724—Millwright Work. |
(MA) DOOR INSTALLATION—METAL OR METAL COVERED—IN GARAGES—NOT OVERHEAD
(MA) ELEVATOR DOOR BUCKS—INSTALLATION
(MA) FIRE DOOR INSTALLATION
(MA) FIRE ESCAPE INSTALLATION—INSIDE OF BUILDINGS
(MA) IRON OR STEEL—ERECTION—DOOR, DOOR FRAME OR SASH ERECTION—METAL OR METAL COVERED
| Note: |
Installation of storm doors or storm sash to be separately rated as Code 5645—Carpentry. Overhead door installation to be separately rated as 3724—Millwright Work. |
(MA) METAL SASH INSTALLATION
(MA) MUNICIPAL, TOWNSHIP, COUNTY OR STATE EMPLOYEE NOC—MAJOR GOVERNMENTAL OCCUPATIONS ASSIGNED TO CLASSIFICATIONS OTHER THAN CODE 9410—CHRISTMAS LIGHTS AND DECORATIONS INSTALLATION—OUTSIDE
(MA) PRISON CELL ERECTION—STEEL
(MA) STEEL FRAME ERECTION—INTERIOR—LIGHT GAUGE STEEL BY SPECIALIST CONTRACTOR
(MA) TENT, AWNING OR CANVAS GOODS ERECTION, REMOVAL, OR REPAIR
| Note: |
Applies to operations away from the shop. |
(NY) DOOR, DOOR FRAME OR SASH ERECTION
| Note: |
Metal or metal-covered installation of storm doors or storm sash to be separately rated as Code 5428 |
(NY) DOOR, DOOR FRAME OR SASH ERECTION—METAL OR METAL COVERED
| Note: |
Erection or installation of storm doors or storm sash to be separately rated as Code 5428. |
(OR) AWNING, TENT, OR CANVAS GOODS INSTALLATION, REMOVAL, OR REPAIR
| Note: |
Applies to operations away from the shop. This classification applies to the installation, repair, or removal of canvas or vinyl-covered awnings. It includes sheet metal awnings only if sheet metal awning work is performed in connection with canvas- or vinyl-work at the job site. Contracts for installation, repair, or removal of sheet metal awnings only are classified to Code 5535. Roofing to be separately rated as Code 5551. |
(OR) CARPENTRY—IRON, BRASS, OR BRONZE—NONSTRUCTURAL—INTERIOR
| Note: |
Applicable to specialist contractors performing interior, non-weight-bearing, light gauge steel stud construction in any type of building. See Wallboard, Sheetrock, Drywall, Plasterboard, or Cement Board Installation Within Buildings & Drivers. Also, see Iron or Steel Frame—Interior—Light Gauge Steel Installation |
(OR) IRON OR STEEL ERECTION— FRAME—INTERIOR—LIGHT GAUGE STEEL INSTALLATION
| Note: |
For additional applications, of iron/steel erection, see Part Two pages. See Carpentry; Iron or Steel Frame—Interior—Light Gauge Steel Installation and Wallboard, Sheetrock, Drywall, Plasterboard, or Cement Board Installation Within Buildings & Drivers. |
(OR) IRON OR STEEL FRAME—INTERIOR—LIGHT GAUGE STEEL INSTALLATION
| Note: |
By wallboard, sheetrock, drywall, plasterboard, or cement board contractor or specialist contractor. |
(TN) STAGE CONSTRUCTION BY CONTRACTOR—METAL
| Note: |
Applies to contractors constructing or installing metal or steel structures upon which draperies, canvases, lights, or other equipment for an indoor or outdoor stage production would be placed. Refer to Code 5403 for the construction of wooden structures for an indoor or outdoor stage production. |
(TX) ALUMINUM DOOR, WINDOW AND FRAME INSTALLATION & DRIVERS
(TX) AWNING, TENT OR CANVAS GOODS ERECTION, REMOVAL OR REPAIR & DRIVERS
| Note: |
Applies to operations away from the shop. |
(TX) BOOTH INSTALLATION FOR TRADE SHOWS & DRIVERS
(TX) CABINET, SHELVING & BIN INSTALLATION—PORTABLE & DRIVERS
(TX) CANVAS GOODS, AWNING OR TENT ERECTION, REMOVAL OR REPAIR & DRIVERS
| Note: |
Applies to operations away from the shop. |
(TX) CARPET INSTALLATION & DRIVERS
(TX) DOOR, DOOR FRAME OR SASH ERECTION—METAL OR METAL COVERED & DRIVERS
| Note: |
Overhead door installation to be separately rated as 3724—Millwright Work. |
(TX) DRIVE-UP WINDOW INSTALLATION & DRIVERS
(TX) ELEVATOR ENTRANCE AND DOOR INSTALLATION & DRIVERS
(TX) FIXTURES OR FURNITURE INSTALLATION—PORTABLE NOC & DRIVERS
(TX) FLOOR COVERING—INSTALLATION OF LINOLEUM, ASPHALT, OR RUBBER TILING & DRIVERS
| Note: |
Ceramic tile installation to be separately rated as 5348. |
(TX) FLOORING INSTALLATION—PEDESTAL TYPE & DRIVERS
(TX) FURNITURE OR FIXTURES INSTALLATION—PORTABLE NOC & DRIVERS
(TX) HOUSE FURNISHINGS INSTALLATION NOC AND UPHOLSTERING, DRIVERS
(TX) IRON OR STEEL—ERECTION—DOOR, DOOR FRAME OR SASH ERECTION—METAL OR METAL COVERED & DRIVERS
(TX) IRON OR STEEL—ERECTION—IRON, BRASS OR BRONZE ERECTION—DECORATIVE OR ARTISTIC & DRIVERS
(TX) IRON OR STEEL—ERECTION—IRON, BRASS OR BRONZE ERECTION—NONSTRUCTURAL—INTERIOR & DRIVERS
(TX) PEDESTAL FLOORING INSTALLATION & DRIVERS
(TX) PRISON OR JAIL CELL ERECTION—STEEL & DRIVERS
(TX) RESTAURANT EQUIPMENT INSTALLATION & DRIVERS
(TX) SHOWER DOOR AND STALL INSTALLATION & DRIVERS
(TX) STADIUM STANDS INSTALLATION—PORTABLE—INTERIOR & DRIVERS
(TX) TENT, AWNING OR CANVAS GOODS ERECTION, REMOVAL, OR REPAIR & DRIVERS
| Note: |
Applies to operations away from the shop. |
(TX) VACUUM CLEANER SYSTEMS—INSTALLATION, WITHIN WALLS & DRIVERS
(TX) VENETIAN BLIND INSTALLATION & DRIVERS
Description:
(MA) State Addendum:
As Code 5102 is an erection classification, division of payroll between this code and other construction and/or erection classifications is possible, provided separate payroll records are maintained for each operation. Refer to MA Manual Rule IV-D-8.
Code 5102 is applied to the commercial installation of metal or metal-covered doors, door frames or sash including the installation of non-overhead-type garage doors. It is also applied to the installation of commercial-type pre-glazed metal windows. Refer to Code 5462 for the installation of metal window frames by insureds that also set glass in place. The installation of all types of doors and windows in connection with residential dwelling construction, remodeling or repairs is properly assigned to the appropriate carpentry construction classification codes, Codes 5645, 5651 or 5403. With respects to commercial building construction, remodeling or repairs, the installation of pre-glazed non-metal windows and all types of doors is properly assigned to the appropriate carpentry construction classification code, Code 5403.
The installation of metal decorative storm shutters panel, accordion or roll-down is assigned to Code 5102. All non-metal storm shutter installations are assigned to the appropriate carpentry construction classification codes, Codes 5645, 5651 or 5403.
Shower or tub enclosure installation is assigned to Code 5102. This applies even if the materials include glass, providing the enclosure is pre-glazed. Refer to Code 5462 for shower or tub enclosure installation by insureds that also set glass in place.
Refer to Code 5403 for the setup of portable wood or metal grandstands or bleachers.
Refer to Code 5538 for insureds that set up metal–covered awnings exclusively (Code 5535 N/A MA).